?2002 fairchild semiconductor corporation rev. a, september 2002 KSE13003T npn silicon transistor absolute maximum ratings t c =25 c unless otherwise noted electrical characteristics t c =25 c unless otherwise noted * pulse test: pulse width=5ms, duty cycle 10% symbol parameter value units v cbo collector-base voltage 700 v v ceo collector-emitter voltage 400 v v ebo emitter-base voltage 9 v i c collector current (dc) 1.5 a i cp collector current (pulse) 3 a i b base current 0.75 a p c collector dissipation (t c =25 c) 30 w t j junction temperature 150 c t stg storage temperature - 65 ~ 150 c symbol parameter test condition min. typ. max. units bv ceo collector-emitter breakdown voltage i c = 5ma, i b = 0 400 v i ebo emitter cut-off current v eb = 9v, i c = 0 10 a h fe *dc current gain v ce = 2v, i c = 0.5a v ce = 2v, i c =1a 8 5 40 v ce (sat) *collector emitter saturation voltage i c = 0.5a, i b = 0.1a i c = 1a, i b = 0.25a i c = 1.5a, i b = 0.5a 0.5 1 3 v v v v be (sat) *base emitter saturation voltage i c = 0.5a, i b = 0.1a i c = 1a, i b = 0.25a 1 1.2 v v c ob output capacitance v cb = 10v , f = 0.1mhz 21 pf f t current gain bandwidth product v ce = 10v, i c = 0.1a 4 mhz t on turn on time v cc =125v, i c = 1a i b1 = 0.2a, i b2 = - 0.2a r l = 125 ? 1.1 s t stg storage time 4.0 s t f fall time 0.7 s KSE13003T high voltage switch mode applications ? high speed switching ? suitable for switching regulator and motor control 1.base 2.collector 3.emitter 1 to-220
?2002 fairchild semiconductor corporation KSE13003T rev. a, september 2002 typical characteristics figure 1. static characteristic figure 2. dc current gain figure 3. base-emitter saturation voltage collector-emitter saturation voltage figure 4. switching time figure 5. safe operating area figure 6. power derating 012345 0.0 0.4 0.8 1.2 1.6 2.0 i b = 0ma i b = 100ma i b = 150ma i b = 200ma i b = 50ma i b = 250ma i b = 300ma i b = 400ma i b = 450ma i b = 500ma i b = 350ma i c [a], collector current v ce [v], collector-emitter voltage 0.01 0.1 1 10 0.1 1 10 100 v ce = 2v h fe , dc current gain i c [a], collector current 0.01 0.1 1 10 0.01 0.1 1 10 i c = 4 i b v ce (sat) v be (sat) v be (sat), v ce (sat)[v], saturation voltage i c [a], collector current 0.1 1 0.01 0.1 1 10 t stg t f t stg , t f [ s], time i c [a], collector current 1 10 100 1000 0.01 0.1 1 10 100 s 10 s 1ms 5ms i c max. (pulse) i c max. (dc) i c [a], collector current v ce [v], collector-emitter voltage 0 255075100125150175 0 5 10 15 20 25 30 35 40 45 50 p c [w], power dissipation t c [ o c], case temperature
package dimensions KSE13003T dimensions in millimeters ?2002 fairchild semiconductor corporation rev. a, september 2002 4.50 0.20 9.90 0.20 1.52 0.10 0.80 0.10 2.40 0.20 10.00 0.20 1.27 0.10 ?.60 0.10 (8.70) 2.80 0.10 15.90 0.20 10.08 0.30 18.95max. (1.70) (3.70) (3.00) (1.46) (1.00) (45 ) 9.20 0.20 13.08 0.20 1.30 0.10 1.30 +0.10 ?.05 0.50 +0.10 ?.05 2.54typ [2.54 0.20 ] 2.54typ [2.54 0.20 ] to-220
?2002 fairchild semiconductor corporation rev. i1 trademarks the following are registered and unregistered trademarks fairchild semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. disclaimer fairchild semiconductor reserves the right to make changes without further notice to any products herein to improve reliability, function or design. fairchild does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent rights, nor the rights of others. life support policy fairchild?s products are not authorized for use as critical components in life support devices or systems without the express written approval of fairchild semiconductor corporation. as used herein: 1. life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. a critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. product status definitions definition of terms datasheet identification product status definition advance information formative or in design this datasheet contains the design specifications for product development. specifications may change in any manner without notice. preliminary first production this datasheet contains preliminary data, and supplementary data will be published at a later date. fairchild semiconductor reserves the right to make changes at any time without notice in order to improve design. no identification needed full production this datasheet contains final specifications. fairchild semiconductor reserves the right to make changes at any time without notice in order to improve design. obsolete not in production this datasheet contains specifications on a product that has been discontinued by fairchild semiconductor. the datasheet is printed for reference information only. fact? fact quiet series? fast ? fastr? frfet? globaloptoisolator? gto? hisec? i 2 c? implieddisconnect? isoplanar? littlefet? microfet? micropak? microwire? msx? msxpro? ocx? ocxpro? optologic ? optoplanar? pacman? pop? power247? powertrench ? qfet? qs? qt optoelectronics? quiet series? rapidconfigure? rapidconnect? silent switcher ? smart start? spm? stealth? supersot?-3 supersot?-6 supersot?-8 syncfet? tinylogic? trutranslation? uhc? ultrafet ? vcx? acex? activearray? bottomless? coolfet? crossvolt ? dome? ecospark? e 2 cmos? ensigna? across the board. around the world.? the power franchise? programmable active droop?
|
